行業資訊
裝載機的裝卸作業如何進行?
來源:http:/// 日期:2023-01-16
由于裝載機具有作業速度快、效率高、機動性好、操作輕便等優點,因此它成為工程建設中土石方施工的主要機種之一。那您知道怎么的進行裝卸工作嗎?下面濟南裝載機租賃廠家為您解答。
Because the loader has the advantages of fast operation, high efficiency, good mobility, easy operation, etc., it has become one of the main types of machinery for earthwork construction in engineering construction. Do you know how to load and unload safely? Next, Jinan loader rental manufacturer will answer for you.
1、發動機的水溫及潤滑油溫度達到規定值時方可進行全負,荷作業,當水溫、油溫超過363K(90℃)時應停車,查找原因,待水溫低于363K(90℃)時方可作業,否則會損壞發動機。
1. When the water temperature and lubricating oil temperature of the engine reach the specified value, the full load operation can be carried out. When the water temperature and oil temperature exceed 363K (90 ℃), the engine shall be stopped to find out the cause, and the operation can only be carried out when the water temperature is lower than 363K (90 ℃), otherwise the engine will be damaged.
2、禁止在前后車體形成角度時鏟裝貨物。取貨前,應使前后車體形成直線,對正并靠近貨堆,同時使鏟斗平行接觸地面,然后取貨。
2. It is forbidden to shovel and load goods when the front and rear car bodies form an angle. Before picking up the goods, make the front and rear car bodies form a straight line, align and close to the cargo pile, and make the bucket parallel to the ground, then pick up the goods.
3、除散糧以外,不準用高速檔取貨。
3. Except bulk grain, it is not allowed to pick up goods at high speed.
4、不準邊行駛邊起升鏟斗。
4. Do not lift the bucket while driving.
5、鏟斗鏟裝貨物應均衡,不準鏟斗偏重裝載貨物。
5. The goods loaded by the bucket should be balanced, and the bucket is not allowed to load the goods excessively.
6、裝載車是用來進行裝載及短途運輸散裝物料的車輛,禁止用鏟斗進行挖掘作業。
6. The loader is a vehicle used for loading and transporting bulk materials in short distance. It is prohibited to excavate with a bucket.
7、駕駛員離車前,應將鏟斗放到地面,禁止在鏟斗懸空時駕駛員離車。
7. Before leaving the vehicle, the driver should put the bucket on the ground. It is forbidden to leave the vehicle when the bucket is suspended.
8、起升的鏟斗下面嚴禁站人或進行檢修作業。若必須在鏟斗起升時檢修車輛,應對鏟斗采取支撐措施,并保證牢固可靠。
8. It is forbidden to stand under the lifted bucket or carry out maintenance work. If it is necessary to repair the vehicle when the bucket is lifted, support measures shall be taken for the bucket and ensure it is firm and reliable.
9、禁止用鏟斗舉升人員從事高處作業。
9. It is forbidden to use bucket to lift personnel to work at heights.
10、禁止在碼頭岸邊直接鏟裝船上的物料。
10. It is forbidden to shovel the materials on the ship directly on the shore of the wharf.
11、在架空管線下面作業,鏟斗起升時應注意不要碰到上方的障礙物,在高壓輸電線路下面作業時,鏟斗還應與輸電線保持足夠的距離。
11. When working under the overhead pipeline, the bucket should not touch the obstacles above when lifting. When working under the high-voltage transmission line, the bucket should also keep enough safe distance from the transmission line.
12、在為載重汽車傾卸物料,鏟斗前翻時不得刮碰車輛,卸載動作要緩和。在卸車作業時,應注意鏟斗不要刮碰車廂。在推運或刮平作業中,應隨時觀察運行情況,發現車輛前進受阻,應審慎操作,不得強行前進。
12. When dumping materials for trucks, the bucket shall not touch the vehicle when overturning, and the unloading action shall be gentle. During the unloading operation, the bucket shall not touch the carriage. During the pushing or scraping operation, the operation shall be observed at any time. If the vehicle is found to be blocked, it shall be carefully operated and forced forward is not allowed.
13、停車后應將換向操縱桿放到位置,將前后車體聯接桿安裝好。
13. After parking, put the reversing control lever in the central position and install the front and rear body safety connecting rods.
裝載機主要用于鏟裝土壤、砂石、石灰、煤炭等散狀物料,也可對礦石、硬土等作輕度鏟挖作業。換裝不同的輔助工作裝置還可進行推土、起重和其他物料如木材的裝卸作業。你有需求隨時來我們這里http://咨詢聯系租賃!
The loader is mainly used to shovel and load bulk materials such as soil, sand, lime, coal, etc., and also can perform light shoveling operations on ores, hard soil, etc. Different auxiliary working devices can also be used for bulldozer, lifting and loading and unloading of other materials such as wood. Come to us whenever you need http:// Consulting Contact Leasing!